Canna Flush helps plants during over-fertilization or in the final stages before harvest. This supplement dissolves the deposited salts in the growing medium and in the plant. It is used in all cultivation methods.
When to use Canna Flush? Let's take a look at it together
- Use in soil and soil mixes: - before adding watering, add 20 ml of Canna Flush to 10 l of water. Make one watering only with clean water and observe the frequency of watering. Then fertilize according to the usual dosage.
- Use in hydroponic systems (open): - add 40 ml of Canna Flush per 10 l of water to the last watering of the day and let 10-20% of the watering drain. Make one dressing only with clean water and let it drain. The next day, start fertilizing according to the usual dosage (let 10-20% drain).
- Pre-harvest use (only for annual plants): - start flushing a week or two before harvest and dose according to the above-mentioned models into the watering once a week. Follow the usual dosage until harvest time.
- Use for cleaning the internal medium: - CANNA FLUSH is suitable for cleaning inert growing media that are used repeatedly (e.g. expanded clay).
Dosage: / see documents
- Add 4ml to 1l of tap water.
- Allow the medium to soak in the solution for 24 hours and then rinse with an equal amount of clean water. If necessary, repeat the procedure.
Store tightly closed in a cold-resistant place. Shake well before use. Keep out of reach of children. It has a limited shelf life after opening. Do not swallow.Nabízíme pouze prověřené produkty od světových značek. | Světově vyhlášené substráty, doplňky a hnojiva Canna. |
Nejvhodnější použití hnojiva. | Přípravky pro poslední týdny pěstování rostlin. |
Objem. | 0,25 L |
Typ hnojiva dle skupenství. | Kapalná tekutá hnojiva na pěstování rostlin se dobře rozpouští ve vodě. |
Výrobce | Canna |