Fan VKM/VKMZ 150, 555m3/h

The metal pipe fan is protected against corrosion by a protective polymer layer. The fan with a diameter of 150 mm allows vertical and horizontal mounting (on the wall and ceiling). It is intended for operation in workshops, halls, shops, offices with lower humidity . It is more suitable for pipelines with a higher pressure loss.

The main advantages of a metal fan:

• single-phase motor with external rotor and ball bearing
• metal radial blades, dynamically balanced turbines
• usable for towing and pulling
• automatic protection against overheating and automatic restart
• cover made of galvanized steel and a polymer protective layer against corrosion
• horizontal and vertical mounting at any angle
• guarantee of safe operation and quiet operation
• wide use in industrial premises (warehouses, workshops, factories, halls, greenhouses, etc.)

Parameters:

• into a pipe with a diameter of 150 mm
• maximum air capacity (output) 555m3/h
• consumption (power) 98W
• pressure 330Pa
• 2705 rpm
• sound pressure level 47dbA
• weight 5.7 kg
• protection IP X4
• optimal operating temperature -25/+45 degrees

Ducted radial fan Vents VKMz 150, 555m3/h is supplied including mounting bracket and instructions. During assembly and handling, strictly follow the instructions given in the Czech manual. You can find the exact and detailed wiring diagram in it. If you are not experienced in wiring this type of fan, seek professional help.