Fan with thermostat Dalap Turbine - VK 315 U, 1340m3/h

Plastic duct fan VK 315 U , 1340 m3/hz of durable ABS plastic is compatible with flexible and rigid air ducts with a diameter of 315 mm. The built-in thermostat will simplify the ventilation of your rooms.

You set the desired temperature manually directly on the fan . If the temperature rises by 2 degrees, the engine will start working faster. When the room cools down, it switches back to a lower speed.

Advantages of the fan VK 315 U, 1340m3/h:

• an ideal choice for extracting air from areas with ducts with a higher pressure drop
• with a built-in thermostat for temperature regulation
• usable for ventilating garages, workshops, shops, growing rooms, offices, etc.
• maintenance-free ball bearing guarantees reliable and quiet motor performance
• single-phase asynchronous external rotor AC motor
• reliable ABS plastic is not subject to corrosion and enables operation in wet areas
• wall or ceiling mounting at any angle
• radial blades , low noise

Parameters:

• into flexible and rigid pipes with a diameter of 315 mm
• max. air capacity (output) 1340m3/h
• consumption (power) 200W
• pressure 505Pa
• 2655 revolutions per minute
• sound pressure 50dbA
• weight 5.1 kg
• optimum operating temperature -25/+50 degrees
• motor overheating protection
• operation up to 40,000 hours and more
• recommended for pipelines with a maximum length of 35m
• protection IP X4

Ducted radial fan Vents VK 315 U with a thermostat and a capacity of 1340m3/h are supplied including fasteners. The speed can only be regulated using an external regulator (thyristor or autotransdormer).

When installing, starting and handling the fan, follow the Czech instructions included in the package. Connect and install exactly according to the manual and the attached diagram.