Fan with thermostat Vents/Dalap 125 UT, 220/280m3/h

Pipe fan TT/Dalap 125 UT with thermostat, single-phase motor and ball bearing. Speed regulation according to temperature.
Obrázek
98,95 EUR 81,78 EUR excl. VAT
In stock
In person at the storeday after tomorrow
Transport companiesTuesday 23.7
CodeTT125UPNVýkonný plastový ventilátor s regulací teploty a otáček

The smaller plastic fan TT 125 U has a maximum output of 220/280m3/ha and is intended for ventilation ducts with a diameter of 125 millimeters. The main advantage of this fan is the electronic temperature sensor , which ensures automatic speed regulation depending on the temperature of the air in the surroundings or in the pipeline. When the temperature rises 2 degrees above the set temperature, the fan switches to a higher speed. After lowering the temperature, it will return.

Main features and parameters:

  • single-phase motor with thermostat and ball bearing
  • lifetime up to 40,000 hours
  • cover made of highly resistant ABS plastic
  • semi-radial plastic vanes
  • motor overheating protection
  • enables connection at any angle and anywhere in the pipe system
  • maximum air capacity (output) 220/280m3/h
  • low consumption (power) 23/37W
  • 1960/2500 rpm
  • pressure 160/136Pa
  • sound pressure level 29/36dbA
  • compatible with round pipes with a diameter of 125 mm
  • weight 1.4 kg
  • protection IP X4
  • max operating temperature 60 degrees
  • into pipes with a maximum length of 17 m

Why is a duct fan with a thermostat an advantage?

The fans of the Vents TT U series are equipped with a thermostat and thus enable automatic speed regulation according to the ambient temperature . It is suitable for the operation of systems that work with high pressure and require minimal noise . Their versatility enables use in all small spaces that require frequent or continuous air exchange (offices, kitchens, bathrooms, greenhouses, workshops or growing areas).

On the plastic body of the fan there is a mounting plate for fixing to the wall. An adjustable timer can be added to the model. Detailed instructions for connection and use can be found in the Czech manual.

Nabízíme pouze prověřené produkty od světových značek.Spolehlivé potrubní ventilátory Vents.
Maximální průtok vzduchu.280 m3/h
Průměr v mm.125 mm
Jaký typ ventilátoru.Axiální potrubní ventilátor., Vícerychlostní ventilátor.
Kolik energie spotřebuje za hodinu.37 W
Zvuková intenzita.36 db
Description

This online shop stores cookies to help it function properly. By using our services you agree to their use.

Detailed settingsAllow everything