Fan with thermostat Vents/Dalap 200 UT, 830/1040m3/h

The professional plastic Vents fan with thermostat TT 200 PRO U, 1040m3/h is compatible with a ventilation pipe with a diameter of 200 millimeters. The TT PRO series boasts extended functions and reliable operation .

Properties:

• two-speed motor with ball bearings and a lifetime of up to 40,000 hours
• built-in thermostat and the option of automatic power regulation according to temperature
• over-standard function delayed start/interval operation/coasting
• cover and semi-radial vanes made of highly resistant ABS plastic
• practical clamps with locks ensure easy disassembly and maintenance
• the motor is protected against overheating by a thermal fuse
• can be connected anywhere in the pipeline system, both horizontally and vertically
• not subject to corrosion
• maximum air capacity (output) 830/1040m3/h
• consumption (power) 90/125W
• pressure 280/345Pa
• 2045/2510 rpm
• sound pressure level 45/52dbA
• compatible with round pipes with a diameter of 200 mm
• weight 6.4 kg
• protection IP X4
• max. operating temperature 60 degrees
• into pipes with a maximum length of 36 meters

Why are TT PRO fans professional?

The plastic pipe fan TT PRO 200 U with thermostat is designed for ventilation systems that work with high pressure and require minimal noise . The main advantage of these fans is higher performance and more functions - delayed start , interval operation or coasting .

TT fans are intended for ventilating all spaces that require constant air exchange (workshops, shops, offices, living spaces, bathrooms, greenhouses or growing areas, etc.).

The fan's plastic body has a mounting plate for wall and ceiling mounting . It is not subject to corrosion and can be used even in damp places .

An electronic temperature sensor that ensures automatic speed regulation depending on the air temperature in the surroundings or in the pipeline. When the temperature rises 2 degrees above the set temperature, the fan switches to a higher speed. After lowering the temperature, it will return. Detailed instructions can be found in the Czech manual.