Fan with thermostat VK 150 U, 460m3/h

Silent duct fan VK 150 U , 460m3/h is made of durable and light ABS plastic. Duct fan with thermostat is suitable for extracting air from offices, shops, apartments, halls or industrial plants .

The internal thermostat works simply and can make your operation easier . First, you set the desired temperature on the fan. If the ambient temperature rises by 2 degrees above the set temperature, the motor will automatically switch to a higher speed. As soon as the temperature returns to normal, the fan automatically switches to a lower speed.

Advantages of the fan VK 150 U, 460m3/h:

• an ideal choice for extracting air from areas with ducts with a higher pressure drop
• with a built-in thermostat for temperature regulation
• usable for ventilating garages, workshops, shops, growing rooms, offices, etc.
• maintenance-free ball bearing guarantees reliable and quiet motor performance
• single-phase asynchronous external rotor AC motor
• reliable ABS plastic is not subject to corrosion and enables operation in wet areas
• wall or ceiling mounting at any angle
• radial blades , low noise

Parameters:

• into flexible and rigid pipes with a diameter of 150 mm
• max. air capacity (output) 460m3/h
• consumption (power) 80W
• pressure 290Pa
• 2725 revolutions per minute
• sound pressure 46dbA
• weight 2.6 kg
• optimum operating temperature -25/+55 degrees
• protection against engine overheating operation up to 40,000 hours and more
• recommended for pipes with a maximum length of 20m
• protection IP X4

We supply the Vents VK 150 U plastic fan with a thermostat and an output of 4600m3/h including fasteners. The speed can only be regulated using an external regulator (thyristor or autotransdormer).

When installing, starting and handling the fan, follow the Czech instructions included in the package. Connect and install exactly according to the manual and the attached diagram.