GSE Humidity and Temp. Step transformer 2.5A (1 fan)

GSE Humidity and Temp. The 2.5A step transformer ensures that the fans do not make any noise at low speeds. The step transformer can control the fan speed 6-steps up or down according to the temperature. The required temperature, humidity and hysteresis (sensitivity) can be set on the controller. Internal hardware setting (Jumper), you can choose whether the minimum speed is 0 of the off position, or that the fan runs at the lowest level to prevent odors from escaping. The sensor comes with a 4 meter long cable and can be extended up to 50 meters.

Technical specifications:
Dimensions: WxHxD = 200x250x180mm
Designed for fans Imax: 2.5A
Primary voltage: 230V/50Hz
Secondary voltage: 80V, 110V, 140V, 170V, 200V, 230V automatic-steps 50Hz
Digital sensor 5V Measures temperatures from -55 °C to + 125 °C
0.5 °C accuracy from -10 °C to + 85 °C
Humidity accuracy ± 4.5% rh
protection class IP54

Setting range:
Temperature: 20 °C - 30 °C
Temperature hysteresis 2 - 8 °C
Humidity: 30% - 100%
Hysteresis humidity 6%-30%
Weight 11.5 kg