Malapa MTH1 combined digital thermostat with hygrostat and regulation

MALAPA MTH1 is a combined digital device designed mainly for regulating the fan speed (exhaust/inflow of air) according to the set values in the room. An adjustable thermostat monitors the correct temperature , a regulated hygrostat takes care of the humidity . Allows you to adjust different engine speeds at set humidity and temperature and other speeds when exceeding set values. For connoisseurs, hysteresis is also adjustable . MTH1 controls and regulates appliances up to 900W. Long-term and error-free operation even under extreme conditions , over design.

Use:

control and regulation of fan speeds (exhaust/supply air) in rooms, spaces, warehouses, dryers, machines and devices, switchboards, low-energy buildings, boiler rooms, botanical gardens, terrariums, animal husbandry, greenhouses, solar water and air heating at home and in industry .

Main function:

• socket (output) max. load 900 W thermostat control
• adjustable minimum speed from 0 to 100%
• adjustable maximum speed from 0 to 100%
• setting the desired temperature in °C
• hysteresis adjustable 1° to 10°C

Hygrostat control:

• adjustable minimum speed from 0 to 100%
• adjustable maximum speed from 0 to 100%
• setting the required humidity in % RH (relative humidity)
• hysteresis adjustable 1-10% RH

All necessary data and information, both set and current, are clearly displayed on the two-line LCD display , naturally in the Czech language.

The integrated processor monitors the inputs, outputs and connection to the sensor every 3 seconds, if necessary it signals an error or malfunction optically and also acoustically . For accurate sensing, it uses a calibrated digital humidity/temperature sensor from the renowned DALLAS company connected via a 1.5m cable extension, the advantage is also control with safe voltage , there is no risk of electric shock. by current.

Control is absolutely simple . All our products have the same kind of menu, if you can control one device, you can control all the others. We protect the device with a fuse. The settings are retained even after a power cut. energy . High coverage guarantees long-term and error-free operation even under extreme conditions , over design.

You can fasten the devices to the wall with hanging brackets (included in delivery). Higher switching/regulated power . adjustment of hysteresis - adjustment of the range of location values: the device can be located in a different room than the sensor , height of the sensor approx. 1.5m above the ground with good air circulation, do not place the sensor near heat radiators.

Hysteresis MTH1: temperature/humidity difference or inertia when the device switches on and off temperature - e.g. if the hysteresis is 1°C, the desired temperature is 20°C, the thermostat switches off at 19°C and switches on again at 20°C) humidity - e.g. if the hysteresis is 1% RH, the desired humidity is 20% RH, the hygrostat switches off at 19% RH and switches on again at 20% RH)

Advantages:

no batteries, it remembers the settings even after a power cut. energy , quick changes in settings and accurate measurement of all quantities , negligible consumption, continuous temperature without fluctuations , pleasant climate, less mechanical/thermal stress on mechanical components, high device coverage , sensor control with safe voltage . An appliance that is not running does not consume any electricity. energy.

Technical data of the MTH1 thermostat and hygrostat:

• max. load - 900W (resistive)
• adjustable minimum speed from 0 to 100%
• adjustable maximum speed from 0 to 100%
• temperature/humidity range - 0° to 100°C, 0% to 100% RH (non-condensing)
• sensor working temperature/humidity - 0° to 80°C, 0% to 100% RH (non-condensing)
• temperature/humidity hysteresis - 1° to 10°C, 1% to 10% RH
• humidity sensor - digitally calibrated - from the manufacturer DALLAS
• sensor length - 1.5 meters
• tolerance - +- 0.25°C, +-3% RH
• sensor size - 50x36x15mm
• power supply - 230V AC 50Hz
• mounting - wall (bracket)/under the plaster (on request)
• menu - Czech (on request Germany, English, Spain)
• supply cord with fork - 3 meters protected by a fuse - 10A
• total weight - 0.94 kg
• size - length 170, width 120, height 85mm
• box - ABS RoHS