Malapa MTJ2 digital regulated thermostat with draft and draft regulation

The device is intended for regulating the speed of the fan in particular (extraction/inflow of warm or cold air) according to the set value in °C . Allows you to adjust a different engine speed at the set temperature and a different speed when the set value is exceeded. For connoisseurs, hysteresis is also adjustable . MTJ2 controls and regulates appliances up to 900W. Long-term and error-free operation even under extreme conditions , over design.

Use:

Control and regulation of the speed of the fan/fans (exhaust/inflow of air) in the room, space such as food production, el. components, machines and devices, switchboards, low-energy buildings, boiler rooms, botanical gardens, terrariums, animal husbandry, greenhouses, solar water and air heating at home and in industry.

The main functions of the thermostat:

- adjustable minimum speed from 0 to 100%

- adjustable maximum speed from 0 to 100%

- setting the required temperature in °C

- hysteresis adjustable from 1° to 10°C

- socket (output) max. load 900W

All necessary data and information, both set and current, are clearly displayed on the two-line LCD display , naturally in the Czech language. The integrated processor monitors the inputs, outputs and connection with the sensor every 3 seconds, if necessary it signals an error or malfunction optically and also acoustically . For accurate sensing, we use a calibrated digital temperature sensor from the renowned DALLAS company connected via a 1.5m cable extension, the advantage is also control with safe voltage , there is no risk of electric shock. by current.

Control is absolutely simple . All our products have the same kind of menu, if you can control one device, you can control all the others. We protect the device with a fuse. The settings are retained even after a power outage. energy. High coverage guarantees long-term and error-free operation even under extreme conditions , over design. You can fasten the devices to the wall with hanging brackets (included in delivery).

Location:

The device can be placed in a different room than the sensor , sensor height approx. 1.5m above the ground with good air circulation, do not place the sensor near heat radiators. Hysteresis MTJ2: temperature difference or inertia when the device turns the suction/blower on and off - e.g. if the hysteresis is 1°C, the desired temperature is 20°C, the thermostat turns off at 19°C and turns on again at 20°C)

Advantages:

no batteries, it remembers the settings even after a power cut. energy, quick changes in settings and accurate measurement of all quantities , negligible consumption, continuous temperature without fluctuations, pleasant climate, less mechanical/thermal stress on mechanical components, high device coverage , sensor control with safe voltage . An appliance that is not running does not consume any electricity. energy.

Technical data of the MTJ2 thermostat:

• max. load - 900W (resistive)
• adjustable minimum speed from 0 to 100%
• adjustable maximum speed from 0 to 100%
• hysteresis adjustable - 1° to 10°C
• temperature sensor - digitally calibrated - from the manufacturer DALLAS
• sensor length - 1.5 meters
• tolerance - +- 0.25°C
• sensor size - diameter 10x 60mm
• power supply - 230V AC 50Hz
• mounting - wall (bracket)/under the plaster (on request)
• menu - Czech (on request Germany, English, Spain)
• supply cord with fork - 3 meters
• working temperature -20° to 70°C, protected by a fuse
• total weight - 1130 gr.
• size - length 170, width 120, height 85mm
• box - ABS RoHS