Malapa switchboard 2+1, 2x600W, 230V

KL00, switchboard 2x 600W (2+1), 230V supplies and switches inductive and resistive loads. We control the switching on and off of the sockets in this device using a noiseless high-performance relay . The relay is silent when switching. Switching contacts made of precious metal alloys allow switching inductive loads such as high-pressure discharge lamps.

To each switched outlet of this switchboard, which are controlled by sp. clock, you can connect max. 1x600W . For powering other devices, the switchboard has an integrated one non-switched socket, which is under permanent voltage. The switchboard has an integrated relay thermal protection (it turns off all switched sockets).

The switch clock with a built-in backup power source guarantees operation even in the event of a power outage. energy for up to 200 hours. Programming of the timer is done by pulling out, and for turning off by pushing in the targets around the dial. You can also switch the switchboard manually. Switch clocks are immune to electromagnetic waves or induction fields.

You can hang the device on the wall using the handle.

Long-term and error-free operation even under extreme conditions, over design.

Distribution of sockets: 2x switched sockets controlled by switching clocks for lighting (each socket max. 1x 600W); 1x unswitched socket, under permanent voltage

Technical data of the KL00 substation:

Power supply - 230V AC 50Hz

Max. total load - 3500W (16A)

Power cord with fork - 3 meters

Operation - manual/automatic

Adjustable time - min. 20 min., max. 24 hours

Switching cycle - 12 hours programs - up to 72 hours/24 hours accuracy +- 1 sec./24 hours

Deposit of hours - battery up to 200 hours

Protection - thermal

Total weight - 1250g

Size - length 165, width 140, height 95mm

The working temperature of the device is -20° to 70°C

Protection - IP43

Box - ABS RoHS